Dr Murugesh M C

Dr. Murugesh M C

Associate Professor|Faculty of Engineering and Technology, Department of Mechanical & Manufacturing Engineering


Dr Murugesh M C has been an Associate Professor with FET, RUAS since 2015. He began his career as a Mechanical Engineer at the Aditya Birla Group, Grasim Industry in Harihar, Davanagere (1994 – 2000). In 2001, he joined GM Institute of Technology, Davanagere, working in various capacities and eventually becoming Assistant Professor and Dean Academic (2014 – 2015). Dr Murugesh studied for his Diploma in Mechanical Engineering from Bapuji Polytechnic in Shabanur, Davanagere (1988 — 1989). He pursued Bachelor’s (1993) and Master’s degrees in Production Engineering System Technology (2005) from UBDTCE, Davanagere and holds a Doctorate in Mechanical Engineering from Visvesvaraya Technological University, Belagavi (2014).

Qualifications

  • PhD in Mechanical Engineering

    Visvesvaraya Technological University, Belagavi

  • M.tech in Production Engineering System Technology

    UBDTCE, Kuvempu University, Davanagere

  • B.tech in Mechanical Engineering

    UBDTCE, Kuvempu University, Davanagere

  • Diploma in Mechanical Engineering

    Bapuji Polytechnic Shabanur, Davanagere

Experience

Total Experience: 25 years

Teaching: 20 years 

Industry Experience: 5 years

Associate Professor — MS Ramaiah University of Applied Science, Peenya IV Phase, Bengaluru. (From August 2015 to till date)

Associate Professor & Dean Academic — GM Institute of Technology, Davanagere. (From August 2014 – June 2015)

Assistant Professor — GM Institute of Technology, Davanagere. (From Aug 2010 to July 2014)

Senior Lecturer — GM Institute of Technology, Davanagere. (From Aug 2007 – July 2010)

Lecturer — GM Institute of Technology, Davanagere. (From Sep 2001 – July 2004)

Mechanical Engineer — Aditya Birla Group, Grasim Industry, Harihar, Davanagere. (From Jan1994 to December 2000)

Research Interest: Characterization of Polymer Matrix Composites, 3D printing, advanced machining processes

Research Expertise: Materials Characterization, Composite Manufacturing, Composite Drilling and performance Evaluation

Keywords

  • Materials Characterization
  • Composite Manufacturing
  • 3D printing
  • advanced machining processes
  • Composite Drilling and performance Evaluation
  • Characterization of Polymer Matrix Composites

International Journal:

  1. M.C. Murugesh, Dr.K.Sadashivappa. Influence of Filler Material on Glass Fiber/​Epoxy Composite Laminates during Drilling’, International Journal of Advances in Engineering & Technology, March 2012, Volume 3, Issue 1, pp.233 – 239.
  2. M.C. Murugesh, K.Sadashivappa. Translaminar Fracture inGFRP Laminate Composites’,International Journal of Material Science Innovations (IJMSI) 1 (3): 150 – 159, 2013.
  3. K. V. Arun, D. Sujay Kumar, M. C. Murugesh. Drilling of TiO2 and ZnS Filled GFRP Composites’, Journal of Minerals and Materials Characterization and Engineering, 2012, 11, pp 785 – 789.
  4. Arun KV, Sujay Kumar D and Murugesh MC. Effect of TiO2 and ZnS fillers on the bearing strength of gfrp composites’, Journal of Reinforced Plastics and Composites, 2012, pp 1 – 9.
  5. K.V. Arun, D. Sujay Kumar, M.C. Murugesh. Influence of Bolt Configuration and TiO2/​ZnS Fillers Content on the Strength of Composite Fasteners’, Journal of Materials and Design, 53. 2014:p. 51 – 57.
  6. M.C. Murugesh, Dr. K.Sadashivappa. Influence of Cutting Parameters During Drilling of Filled Glass Fabric Reinforced Epoxy Composites’, Journal of Science and Engineering of Composite Materials, 2013.
  7. Murugesh M C,Sujay Kumar D and Arun KV, Drilling of TiO2 and ZnS Filled GFRP Composites ‑A Taguchi Approach’, International Journal of Manufacturing, Materials and Mechanical Engineering, 4(1), 43 – 55, 2014.
  8. Murugesh M C,Sujay Kumar D and Arun KV, Effect of TiO2 and ZnS Fillers on the Bending Characteristics of GFRP Composites under Varied Flaw Configurations’, International Journal of Manufacturing, Materials and MeNational Journal
  9. M.C. Murugesh, Dr.K.Sadashivappa. Effect of Notch Orientation, Temperature and Filler Material on Impact Toughness of GFRP Composites’, Indian Journal of Applied Research, Volume 1, Issue 6, March 2012.
  10. M.C. Murugesh, Dr.K.Sadashivappa. Effect of Spindle Speed on Thrust Force and Delamination Factor when Drilling Glass Fiber/​Epoxy Composite Laminates’, Manufacturing Technology Today, July 2011.

International Conference:

  1. M.C. Murugesh, Dr.K.Sadashivappa. Effect of Notch Orientation and Temperature on Impact Toughness of Epoxy Based GF Composites’, International conference on Science and Engineering, Rohtak, Haryana, 2011.
  2. M.C. Murugesh, Dr.K.Sadashivappa. Effect of Notch Orientation, Temperature and Filler Material on Impact Toughness of GFRP Composites’, International Conference on Design, Analysis, Manufacture & Simulation (ICDAMS), Saveetha School of Engineering, Chennai, 2013.

National Conference:

  1. M.C. Murugesh, Dr. Somashekhar.S.Hiremath. Proposed investigations on Epoxy-Filled Composites’, COMET national conference, Bellary, 2006.
  2. M.C. Murugesh, Dr. Somashekhar.S.Hiremath. Machinability Aspects of Polymer Epoxy Composites –A Review’, (AMMP) UBDT College, Davanagere, 2007.chanical Engineering, 3(4), 30 – 43, 2013

  • INDIAN SOCIETY FOR TECHNICAL EDUCATION (ISTE)

    LIFE MEMBER

  • MATERIAL RESEARCH SOCIETY OF INDIA (MRSI)

    LIFE MEMBER