| Sl. No. | Project Title |
|---|---|
| Design and Development | |
| 1 | Design Improvement & Standardization of Belt Conveyors & Belt Feeders |
| 2 | Design and Development of Semi-Active Suspension |
| 3 | Design and fabricating of fixture for transducer spool arrays |
| 4 | Design of hydraulic assisting platform for tilting a Container |
| 5 | Development of Semi-Active Suspension for Vehicle (SUV) |
| 6 | Design Methodology for Helical Rotary Actuator |
| 7 | Automotive Torque Converter Design Code Development |
| 8 | Design and Development of Autonomous Micro Helicopter |
| 9 | Design and Development of Robotic Camera Stabilizer Mount |
| 10 | Machining & Fabrication of Emission Monitoring Parts |
| 11 | Benchmarking of Hot-End System |
| Structural Analysis | |
| 12 | Finite Element Analysis & Optimization of Opto-Mechanical Sensor |
| 13 | Finite Element Analysis of Exhaust Casing of a Steam Turbine |
| 14 | Finite Element Analysis of a Space Craft Structure |
| 15 | Finite Element Analysis of Automobile Seating System |
| 16 | Finite Element Analysis of a Gear box |
| 17 | Finite Element Analysis of Rear Fender Extension |
| 18 | Finite Element Analysis of a Truck Trailer Isolator System |
| 19 | Finite Element Analysis of an Excavator |
| 20 | Finite Element Analysis of an Automotive Piston |
| 21 | Finite Element Analysis of a Radar Component |
| 22 | Engineering Analysis of a Cement Conveying Boom |
| 23 | Engineering Analysis of a Vacuum Chamber |
| 24 | Finite Element Analysis and Redesign of a Bus Passenger Seat |
| 25 | Finite Element Analysis of Exhaust Casing of 525 mm (multi stage) Turbine |
| 26/td> | Finite Element Analysis of Automotive Components |
| 27 | Finite Element Modeling and Fatigue Analysis of a Tractor Seat |
| 28 | Finite Element Modeling of a V-Engine Block / Cylinder |
| 29 | Seismic Analysis of a Battery Charger |
| 30 | Finite Element Analysis of a Variable Mach Number Wind Tunnel |
| 31 | Finite Element Analysis and Finite Element Analysis of a Cradle Bracket |
| 32 | Geometric Modeling and Finite Element Analysis of an Airborne Winch System |
| 33 | Geometric Modeling and Fatigue Analysis of a Rail Wheel |
| 34 | Mounting of Crane on Jet Deflector Crane Car and Stability Calculations |
| 35 | Design Optimization of Turret Lathe Bed |
| 36 | Test Rig Simulation of Six Axis Machine |
| 37 | Rotor Dynamic Analysis and Static & Dynamic Analysis of Turbocharger Rotor |
| 38 | Structural Analysis of Hypersonic Tube |
| 39 | Structural of Pump Drive Line |
| 40 | Structural of Air Filter |
| 41 | Finite Element Modeling of Plastic Components |
| 42 | Finite Element Analysis of LFDS Funnel |
| 43 | Funnel Modeling and Exploded View Generation |
| 44 | Finite Element Analysis of LFDS Funnel |
| 45 | Vibration Analysis of Mixer |
| 46 | Non-linear Static Analysis of Diesel Injector Assembly |
| 47 | Shock Analysis for Electronic Cabinets |
| 48 | Linear Static Analysis & Optimization of Vacuum Chamber |
| 49 | Non-linear Transient Analysis of Carrier Plate |
| 50 | Finite Element Analysis of Plastic Vessel |
| 51 | Linear Static Analysis of Piping Support |
| 52 | Visualization of Centrifuge and its Assembly Sequence |
| 53 | Finite Element Analysis of Median Marker |
| 54 | Finite Element modeling of BIW |
| 55 | Structural Analysis of ATR |
| 56 | Finite Element Analysis of Vacuum Chamber |
| 57 | Linear Static Analysis for Carriage-11436X (width 72") |
| 58 | Geometric Modeling and Finite Element Analysis of Lid Assembly |
| 59 | Finite Element Analysis of Conveyer System |
| 60 | Structural Analysis of Support Structure for Cyclone & Moisture Trap |
| 61 | Structural analysis of Air Filter |
| 62 | Static Analysis of Chamber |
| 63 | Static Analysis of Pallet |
| 64 | Shock Response Analysis of 5 level cabinet |
| 65 | Structural Analysis of FLR-Container |
| 66 | Structural Analysis of Fire Control System |
| 67 | Static Analysis of Top Chamber VL-5B |
| 68 | Static Analysis of Chamber |
| 69 | Buckling Analysis of Chamber |
| 70 | Finite Element Analysis of Piston Driven Shock Tube |
| 71 | Static Analysis of Quench Chamber |
| 72 | Structural Analysis of ATR Tray |
| 73 | Static and Buckling Analysis of Chamber |
| 74 | Finite Element Analysis of Transport Mechanism and Optimization |
| 75 | Static & Buckling Analysis of Autoclave Chamber |
| 76 | Shock Analysis for Transducer spool Assembly |
| 77 | Structural Analysis for RFP Cabinet & Consoles |
| 78 | Linear Static Analysis of Chassis |
| 79 | Finite Element Analysis of SF Complex System |
| 80 | Finite Element Analysis of VDO Chamber |
| 81 | Static Analysis of the ART Structure |
| 82 | Structural Analysis of Plastic vessel |
| 83 | Linear Static Analysis of Chassis with Mast |
| 84 | Finite Element Analysis of Container Platform |
| 85 | Static Analysis of a Mirror |
| 86 | Finite Element Analysis on Ante Chamber |
| 87 | Finite Element Analysis of Engine Block and Cylinder Head Gasket Leakage |
| 88 | FE analysis of caster ride-on(toy) |
| 89 | Finite Element analysis of whiffletree arms and its support |
| 90 | Finite Element Analysis of Infiltration Chamber |
| 91 | Finite Element Analysis of Resin Chamber |
| 92 | Static Analysis of a Connector |
| 93 | Weight Reduction Study on Axle of BVZI Wagon wheel |
| 94 | Structural Analysis of LFDS Funnel |
| 95 | Finite element analysis of UTM |
| 96 | Static Analysis of Furnace Chamber |
| 97 | Optimization of BG loco wheel for warpage reduction |
| 98 | Noise Reduction Program |
| 99 | Study for Response Reduction in Motor |
| 100 | Finite Element Analysis of Chamber with Hinge Door |
| 101 | Finite Element Analysis of Tx Cabinet |
| 102 | Finite Element Analysis of Block Assembly |
| 103 | Finite element analysis of Steam Turbine |
| 104 | Structural Integrity Test on Robot- Mounted Camera |
| 105 | Finite element analysis of ROPS and FOPS structure for dump truck cabin |
| 106 | Structural Analysis of Fuel Monitoring Equipment |
| 107 | Finite Element Modeling and Analysis of Bearing Fatigue Testing Equipment |
| 108 | Finite Element Analysis of Twin Door Metallising Unit |
| 109 | Finite Element Analysis of Casting |
| 110 | Structural Analysis of Hermetically Sealed Unit |
| 111 | Finite element analysis of A0117 – ATR and A0119 - ATR |
| 112 | Structural analysis of the Display console & workstation |
| 113 | Structural analysis of the HAMSA NG Cabinets |
| 114 | Finite Element Modeling and Analysis of Spine |
| 115 | Structural Analysis of the Universal Testing Machine Assembly |
| 116 | Structural Analysis of CC, CO EEP, LC and SSC Cabinets |
| 117 | Modal Analysis of the Universal Testing Machine Assembly |
| 118 | Static Analysis of Furnace Chamber |
| 119 | Static Analysis of Cubical Oven |
| 120 | Dynamic Response Analysis of Linear Friction Welding Machine |
| 121 | Finite Element Analysis of ATR Fixture |
| 122 | Finite element analysis of Trailer Assembly |
| 123 | Rotor dynamic analysis of Shaft Assembly |
| 124 | Modeling Finite Element Analysis of Main Frame Structure with Boom Post Assembly |
| 125 | Structural Analysis of A0234 Unit |
| 126 | Structural Analysis of A0247 and A0223 Unit |
| 127 | Finite Element Analysis of Rack Assembly |
| 128 | Finite Element Analysis of Power Supply Unit |
| 129 | Structural analysis of the GCP Console |
| 130 | Finite Element Analysis of Chamber Assembly |
| 131 | Finite Element Analysis of Gear Box Housing |
| 132 | Structural Analysis of A0267 Transformer Unit |
| 133 | Structural Analysis of Auxiliary chamber, Main chamber and Hinge assembly |
| 134 | Finite Element Analysis of magnetron door chamber assly for valeo project |
| 135 | Finite element analysis of 105KW propulsion motor enclosure integrated with cooling channels |
| 136 | Structural Analysis of A0234 Unit |
| 137 | Finite Element Analysis of Solar panel assembly |
| 138 | Finite element analysis of Chassis with and without Mast |
| 139 | Finite Element Analysis of Connector Assembly |
| 140 | Finite Element Analysis of BG Loco Cast Steel Wheel using 3D model |
| 141 | Structural Analysis of A0204 Unit |
| 142 | Finite Element Analysis of Commercial Vehicle Pump Assembly |
| 143 | Finite Element Analysis of Megntron Door Chamber Assembly |
| 144 | Finite Element Analysis of LPSC Chamber Assembly |
| 145 | Finite Element Analysis of Electronic unit |
| 146 | Structural Analysis of A0234 Unit |
| 147 | Finite Element Analysis of Pressure Vessel |
| 148 | Finite element analysis of 105KW propulsion motor enclosure integrated with cooling channels |
| 149 | Finite Element Analysis of Knee Implants |
| 150 | Structural Analysis of Active, OAS, Processor and Processor-2 Cabinets |
| 151 | Finite Element Analysis of Console |
| 152 | Finite Element Analysis of Pressure Vessel |
| 153 | Rotor- Dynamics Analyses for Chanju Project |
| 154 | Finite Element Analysis of Mission Payload Computer |
| 155 | Structural Analysis of Sharang and Akshay PDP Cabinets |
| 156 | Finite Element Analysis of DMFC V4 Console |
| 157 | Finite Element Analysis of DMFC V4 Console |
| 158 | Structural Analysis of TMT |
| 159 | Finite Element Analysis of Glove Box |
| 160 | Finite Element Analysis Vacuum Drying Oven |
| 161 | Finite Element Analysis of Chamber Assembly with Door |
| 162 | Finite Element Analysis of ATR Chassis |
| 163 | Finite Element Analysis of Chamber Assembly |
| 164 | Finite Element Analysis of Pressure Intensifier and Piston |
| 165 | Finite Element Analysis of Cooling Unit |
| 166 | Finite Element Analysis of Chamber Door Assembly |
| 167 | Structural Analysis of DCP and Server Cabinets |
| 168 | Analysis of DG systems and Control Unit |
| 169 | Finite Element Analysis of Airworthy Computer (AWC)-TRICOR10NV-FCTA |
| 170 | Finite Element Analysis of Rescue Hoist Bracket |
| 171 | Finite Element Analysis of Chiller Plant |
| 172 | Finite Element Analysis of Quench Chamber |
| 173 | Finite Element Analysis of Chamber Door Assembly |
| 174 | Finite Element Analysis of High Vacuum Furnace - NFC |
| 175 | Finite Element Analysis of Acceleration Vaccum Box - IPR |
| 176 | Finite Element Analysis of TS Vessel Assembly - IPR |
| 177 | Seismic Analysis of Acceleration Vaccum Box and TS Vessel Assembly |
| 178 | Finite Element Analysis of DG System for INSB |
| 179 | Finite Element Analysis of Vacuum Furnace |
| 180 | Finite Element Analysis of NFC-2 |
| 181 | Finite Element Analysis of Fixture 1 |
| 182 | Finite Element Analysis of Fixture 2 |
| 183 | Finite Element Analysis of Quench Chamber |
| 184 | Finite Element Analysis of IDU |
| 185 | Finite Element Analysis of WLR Cooling Unit and control panel |
| 186 | Finite Element Analysis of WLR Cooling Unit and control panel |
| 187 | Finite Element Analysis of P15 A and P17 Unit |
| 188 | Finite Element Analysis of Connectors |
| 189 | Finite Element Analysis of DG System for INSB |
| 190 | Static Analysis and Optimization of Solar Frame Structure |
| 191 | Finite Element Analysis and Thermal Analysis Of KA Band Transmitter |
| 192 | Finite Element Analysis of TG system for PT15 Bravo |
| 193 | Finite Element Analysis and Thermal Analysis for C-Band QRSAM |
| 194 | Finite Element Analysis of Solar Frame Structure |
| 195 | Finite Element Analysis of AO294 -11 |
| 196 | Finite Element Analysis of BARO VACUUM CHAMBER |
| 197 | Finite Element Analysis of Solar Frame Structure |
| 198 | Roto-Dynamic Analysis of Compressor Assembly |
| 199 | Finite Element Analysis of BARO VACUUM CHAMBER (With Modified Dish) |
| 200 | Finite Element Analysis of Portal Frame |
| 201 | Finite Element Analysis of CAT90 |
| 202 | Finite Element Analysis of Chiller Plant (40 Kw) |
| 203 | Finite Element Analysis of Valve Disc |
| 204 | Finite Element Analysis of 20KW Liquid Cooling Unit |
| 205 | Finite Element Analysis of Chamber Assembly TF600 |
| 206 | Finite Element Analysis of AOA Light |
| 207 | Finite Element Analysis of POSITION LIGHT |
| 208 | Finite Element Analysis of Valve Disc |
| 209 | Finite Element Analysis of APDU ASSY |
| 210 | Finite Element Analysis of Knife Plate |
| 211 | Modeling and Simulation of Load Bearing CFRP Structure |
| 212 | Finite Element Analysis of 3 KW Chiller Unit |
| 213 | Finite Element Analysis of Servo Electronic Unit |
| 214 | Finite Element Analysis of P01 Unit |
| 215 | Finite Element Analysis of 17KVA Transformer PDU , 40KVA Transformer PDU & Control PDU |
| 216 | Finite Element Analysis of RM44637-Oil Reservoir Unit |
| 217 | Finite Element Analysis of Isolation Transformer Cabinet |
| 218 | Finite Element Analysis of P07 Unit |
| 219 | Finite Element Analysis of DG-P 15 BRAVO System |
| 220 | Finite Element Analysis of Cargo Hook |
| 221 | Finite Element Analysis of Gas Quench Assembly |
| 222 | Finite Element Analysis of Al. Coating Plant |
| 223 | Finite Element Analysis of Vertical Actuator |
| 224 | Finite Element Analysis of Durability UTM |
| 225 | Structural Analysis for Project HMS & LFVDS |
| 226 | Finite Element Analysis of Electronic Cabinet |
| 227 | Studies on Noise level (Pollution) in Power Loom Machines |
| 228 | Design and Finite Element Analysis of Under Slung System |
| 229 | Finite Element Analysis of DG System for B&D Class |
| 230 | Shock,Noice,Vibration analysis on LCP for SMMG |
| 231 | Finite Element Analysis Of ERP Electronic Unit |
| 232 | Finite Element Analysis of XBAND Electronic Unit |
| 233 | Finite Element Analysis and Thermal Analysis of Electronic Unit |
| 234 | Finite Element Analysis of K-Band-Transmitter- Project PHAROS |
| 235 | Finite Element Analysis of Work station |
| 236 | Finite Element Analysis of DG & Humsa NG Transducer Array System |
| 237 | Finite Element Analysis of Autoclave Chamber |
| 238 | Finite Element Analysis of SPL-267 |
| 239 | Finite Element Analysis of DG System for P15-B Class |
| 240 | Finite Element Analysis of Winch |
| 241 | Finite Element Analysis of Implant Body |
| 242 | Finite Element Analysis of Platform Assembly |
| 243 | Finite Element Analysis RFBF Chamber |
| 244 | Finite Element Analysis Process chamber assembly |
| 245 | Finite Element Analysis of DIY Chamber |
| 246 | Finite Element Analysis of 20 Bar and 100 Bar Pressure Vessel |
| 247 | Finite Element Analysis of 6KW Chiller |
| Kinematic and Dynamic Analysis | |
| 248 | Kinematic Analysis of a Conveyer System |
| 249 | Kinematic and Dynamic Simulation of an Excavator |
| 250 | Kinematic Analysis of a Variable Mach Number Wind Tunnel |
| 251 | Kinematic Analysis of Pump Drive Line |
| 252 | Window Closer Analysis using ADAMS |
| 253 | Kinematic Analysis of Door Latch – Actuator Mechanism |
| 254 | Kinematic Analysis of Hydraulic Boom Assembly |
| 255 | Kinematic and Dynamic Analysis of Four bar Mechanism for Lid |
| 256 | Multi Body Dynamic Simulation of Tandem Bogie Suspension |
| 257 | Multi body dynamic simulation of D/O Cage Assembly |
| 258 | MBD Analysis of Chamber Door Hinge |
| 259 | Development of Forward and Inverse Kinematics Analysis for Motion Controller of End to End Mine Detection & NBC Reconnaissance Payload Systems |
| 260 | Kinematic Analysis of Single Cylinder Engine Piston |
| 261 | Kinematic and Dynamic Analysis of Variable Guide Vane Mechanism |
| 262 | Kinematic and Dynamic Analysis of Thrust Vectoring Nozzle |
| Computational Fluid Dynamic (CFD) Analysis | |
| 263 | CFD Analysis for Prediction of Plume Trajectory |
| 264 | CFD Analysis for Ventilation and Defrost |
| 265 | CFD Analysis of a Duct System |
| 266 | CFD Analysis of the Gas Flow Distribution of a U-Tube Heat Exchanger |
| 267 | CFD Analysis of a Radiator Cap |
| 268 | 2D & 3D Simulation of Fluid Domain including Heat Transfer and Radiation – Airflow Analysis |
| 269 | CFD Analysis of Diesel Heating Plug |
| 270 | CFD analysis for LFB function in VE pump diesel engine component |
| 271 | CFD Analysis for cooling of Electronic Device |
| 272 | CFD and Structural analysis of Oil Filter |
| 273 | Study on flow of air and mist in the Shop Floor |
| 274 | CFD analysis of Telephone Instrument |
| 275 | CFD Analysis of Air Filter |
| 276 | CFD Analysis on a Diesel Engine Silencer |
| 277 | Nozzle Analysis using Fluent |
| 278 | CFD Analysis of Air Filters |
| 279 | CFD Analysis of Flow Meter |
| 280 | CFD analysis of nozzle |
| 281 | Design Optimization of Air Filter for Reduction in Pressure Drop |
| 282 | Computational Fluid Dynamic (CFD) Analysis of Reformer |
| 283 | CFD analysis to evaluate the thermal performance of ATR-2 |
| 284 | CFD analysis to evaluate the thermal performance of ATR-2( Iteration-II) |
| 285 | CFD -Thermal Analysis of CDU |
| 286 | CFD Analysis of the Exhaust Duct of a Dump Truck |
| 287 | CFD -Thermal Analysis of IU Box |
| 288 | Fluid structure interaction Analysis of u channel cooling device |
| 289 | CFD Analysis of ORC Turbine System |
| 290 | CFD Analysis of trailer unit |
| 291 | CFD Analysis of generic search light head |
| 292 | Performance Study and Improvement in the Design of Submersible Pump by CFD |
| 293 | CFD Analysis of the Deployment System & Shape/Length Optimization of the Drogue Unit |
| 294 | CFD Analysis of Al Mansoor Gate Mall |
| 295 | CFD Analysis of the Deployment System & Shape/Length Optimization of the Drogue Unit |
| 296 | Air flow Analysis of the Housing with Rotor |
| 297 | CFD Analysis of Hydraulic Actuator Seal Clearance Region |
| Thermal Analysis | |
| 298 | Thermal Analysis of Electronic Equipment |
| 299 | Thermal Analysis of ATR |
| 300 | Analysis to evaluate the thermal performance of ATR |
| 311 | Thermal Analysis of 5 level Cabinet |
| 312 | Transient Thermal Analysis of ATM |
| 313 | Thermal Analysis of Plastic vessel |
| 314 | Thermal analysis of A0107 ATR |
| 315 | Thermal analysis of A0128 ATR |
| 316 | Thermal Analysis of Single display and Dual Display Units |
| 317 | Thermal Analysis of Tx Cabinet |
| 318 | Thermal Analysis of Hermetically Sealed Unit |
| 319 | Thermal Analysis of TBGA |
| 320 | Thermal Analysis of CC, CO EEP, LC and SSC Cabinets |
| 321 | Thermal Analysis of Platen |
| 322 | Thermal Analysis of A0247 and A0223 Unit |
| 323 | Thermal analysis of the GCP Console |
| 324 | Thermal Analysis of PDP Cabinet (2cases) |
| 325 | Thermal Analysis of Processing Cabinet |
| 326 | Thermal Stress Analysis of Retort Assly. |
| 327 | Thermal analysis of the PMS Console |
| 328 | Thermal Analysis of A0264 Unit |
| 329 | Thermal Analysis of Conduction Cooled ATR |
| 330 | Thermal Analysis of Processing Cabinet |
| 331 | Thermal Analysis of TMT |
| 332 | Thermal Analysis of DCP and Server Cabinets |
| 333 | Thermal Analysis of Active, OAS, Processor and Processor-2 Cabinets |
| 334 | Thermal Analysis of JMC Unit |
| 335 | Thermal Analysis of High Speed ADC-DAC system |
| 336 | Thermal Analysis of INT Unit |
| 337 | Thermal Analysis of CIT-DIO & INT-DIO Cards |
| 338 | Thermal Analysis of SSDVR Unit |
| 339 | THERMAL ANALYSIS of DLRL SBE_PPC_V7 Card |
| 340 | Thermal Analysis of Narrow Band Rack |
| 341 | Thermal Analysis of TRMM system |
| 342 | Thermal Analysis of PO3 Unit |
| 343 | Thermal Analysis of CAT90 |
| 344 | Thermal Analysis Analysis of AOA Light |
| 345 | Thermal Analysis of Servo Electronic Unit |
| 346 | Thermal Analysis of 17KVA Transformer PDU , 40KVA Transformer PDU & Control PDU |
| 347 | Thermal Analysis of P07 Unit |
| 348 | Thermal Analysis of VAM Controller Assembly |
| 349 | Thermal Analysis of Updated 17KVA Transformer PDU |
| 350 | Thermal Analysis of PCB-1 |
| 351 | Thermal & Finite Element Analysis of ESM Electronic Unit |
| 352 | Thermal Analysis of K-Band-Transmitter- Project PHAROS |
| Manufacturing Simulation | |
| 353 | Casting Simulation of component |
| 354 | Resistance Butt Welding (RBW) Process Improvement |
| 355 | Casting Simulation of Steering Housing Complet(89482021) |
M. S. Ramaiah University of Applied Sciences
Private University Estd. in Karnataka State by Act No. 15 of 2013(UGC Approved, NIRF-MHRD Ranked)
University House, Gnanagangothri Campus New BEL Road, M S R Nagar, Bangalore Karnataka, INDIA - 560 054.
(+91) 80 4536 6666
(+91) 80 4536 6677
