Design and Analysis | Manufacturing Simulations |
---|---|
|
|
Modeling & Manufacturing Software | Analysis Software | |
---|---|---|
Modeling
Manufacturing
PLM/PDM
|
Analysis-FE
Analysis-CFD
|
Kinematic/Dynamic Simulation
Vibro-Acoustics
In the process of Purchase
|
3D-Laser Scanner - PICZA LPX 250 Laser Scanner
Well Equipped Machine Shop
Rapid Prototyping-FDM, Stratasys - Dimension SST
Well equipped model studio
Sl. No. | Project Title |
---|---|
Design and Development | |
1 | Design Improvement & Standardization of Belt Conveyors & Belt Feeders |
2 | Design and Development of Semi-Active Suspension |
3 | Design and fabricating of fixture for transducer spool arrays |
4 | Design of hydraulic assisting platform for tilting a Container |
5 | Development of Semi-Active Suspension for Vehicle (SUV) |
6 | Design Methodology for Helical Rotary Actuator |
7 | Automotive Torque Converter Design Code Development |
8 | Design and Development of Autonomous Micro Helicopter |
9 | Design and Development of Robotic Camera Stabilizer Mount |
10 | Machining & Fabrication of Emission Monitoring Parts |
11 | Benchmarking of Hot-End System |
Structural Analysis | |
12 | Finite Element Analysis & Optimization of Opto-Mechanical Sensor |
13 | Finite Element Analysis of Exhaust Casing of a Steam Turbine |
14 | Finite Element Analysis of a Space Craft Structure |
15 | Finite Element Analysis of Automobile Seating System |
16 | Finite Element Analysis of a Gear box |
17 | Finite Element Analysis of Rear Fender Extension |
18 | Finite Element Analysis of a Truck Trailer Isolator System |
19 | Finite Element Analysis of an Excavator |
20 | Finite Element Analysis of an Automotive Piston |
21 | Finite Element Analysis of a Radar Component |
22 | Engineering Analysis of a Cement Conveying Boom |
23 | Engineering Analysis of a Vacuum Chamber |
24 | Finite Element Analysis and Redesign of a Bus Passenger Seat |
25 | Finite Element Analysis of Exhaust Casing of 525 mm (multi stage) Turbine |
26/td> | Finite Element Analysis of Automotive Components |
27 | Finite Element Modeling and Fatigue Analysis of a Tractor Seat |
28 | Finite Element Modeling of a V-Engine Block / Cylinder |
29 | Seismic Analysis of a Battery Charger |
30 | Finite Element Analysis of a Variable Mach Number Wind Tunnel |
31 | Finite Element Analysis and Finite Element Analysis of a Cradle Bracket |
32 | Geometric Modeling and Finite Element Analysis of an Airborne Winch System |
33 | Geometric Modeling and Fatigue Analysis of a Rail Wheel |
34 | Mounting of Crane on Jet Deflector Crane Car and Stability Calculations |
35 | Design Optimization of Turret Lathe Bed |
36 | Test Rig Simulation of Six Axis Machine |
37 | Rotor Dynamic Analysis and Static & Dynamic Analysis of Turbocharger Rotor |
38 | Structural Analysis of Hypersonic Tube |
39 | Structural of Pump Drive Line |
40 | Structural of Air Filter |
41 | Finite Element Modeling of Plastic Components |
42 | Finite Element Analysis of LFDS Funnel |
43 | Funnel Modeling and Exploded View Generation |
44 | Finite Element Analysis of LFDS Funnel |
45 | Vibration Analysis of Mixer |
46 | Non-linear Static Analysis of Diesel Injector Assembly |
47 | Shock Analysis for Electronic Cabinets |
48 | Linear Static Analysis & Optimization of Vacuum Chamber |
49 | Non-linear Transient Analysis of Carrier Plate |
50 | Finite Element Analysis of Plastic Vessel |
51 | Linear Static Analysis of Piping Support |
52 | Visualization of Centrifuge and its Assembly Sequence |
53 | Finite Element Analysis of Median Marker |
54 | Finite Element modeling of BIW |
55 | Structural Analysis of ATR |
56 | Finite Element Analysis of Vacuum Chamber |
57 | Linear Static Analysis for Carriage-11436X (width 72") |
58 | Geometric Modeling and Finite Element Analysis of Lid Assembly |
59 | Finite Element Analysis of Conveyer System |
60 | Structural Analysis of Support Structure for Cyclone & Moisture Trap |
61 | Structural analysis of Air Filter |
62 | Static Analysis of Chamber |
63 | Static Analysis of Pallet |
64 | Shock Response Analysis of 5 level cabinet |
65 | Structural Analysis of FLR-Container |
66 | Structural Analysis of Fire Control System |
67 | Static Analysis of Top Chamber VL-5B |
68 | Static Analysis of Chamber |
69 | Buckling Analysis of Chamber |
70 | Finite Element Analysis of Piston Driven Shock Tube |
71 | Static Analysis of Quench Chamber |
72 | Structural Analysis of ATR Tray |
73 | Static and Buckling Analysis of Chamber |
74 | Finite Element Analysis of Transport Mechanism and Optimization |
75 | Static & Buckling Analysis of Autoclave Chamber |
76 | Shock Analysis for Transducer spool Assembly |
77 | Structural Analysis for RFP Cabinet & Consoles |
78 | Linear Static Analysis of Chassis |
79 | Finite Element Analysis of SF Complex System |
80 | Finite Element Analysis of VDO Chamber |
81 | Static Analysis of the ART Structure |
82 | Structural Analysis of Plastic vessel |
83 | Linear Static Analysis of Chassis with Mast |
84 | Finite Element Analysis of Container Platform |
85 | Static Analysis of a Mirror |
86 | Finite Element Analysis on Ante Chamber |
87 | Finite Element Analysis of Engine Block and Cylinder Head Gasket Leakage |
88 | FE analysis of caster ride-on(toy) |
89 | Finite Element analysis of whiffletree arms and its support |
90 | Finite Element Analysis of Infiltration Chamber |
91 | Finite Element Analysis of Resin Chamber |
92 | Static Analysis of a Connector |
93 | Weight Reduction Study on Axle of BVZI Wagon wheel |
94 | Structural Analysis of LFDS Funnel |
95 | Finite element analysis of UTM |
96 | Static Analysis of Furnace Chamber |
97 | Optimization of BG loco wheel for warpage reduction |
98 | Noise Reduction Program |
99 | Study for Response Reduction in Motor |
100 | Finite Element Analysis of Chamber with Hinge Door |
101 | Finite Element Analysis of Tx Cabinet |
102 | Finite Element Analysis of Block Assembly |
103 | Finite element analysis of Steam Turbine |
104 | Structural Integrity Test on Robot- Mounted Camera |
105 | Finite element analysis of ROPS and FOPS structure for dump truck cabin |
106 | Structural Analysis of Fuel Monitoring Equipment |
107 | Finite Element Modeling and Analysis of Bearing Fatigue Testing Equipment |
108 | Finite Element Analysis of Twin Door Metallising Unit |
109 | Finite Element Analysis of Casting |
110 | Structural Analysis of Hermetically Sealed Unit |
111 | Finite element analysis of A0117 – ATR and A0119 - ATR |
112 | Structural analysis of the Display console & workstation |
113 | Structural analysis of the HAMSA NG Cabinets |
114 | Finite Element Modeling and Analysis of Spine |
115 | Structural Analysis of the Universal Testing Machine Assembly |
116 | Structural Analysis of CC, CO EEP, LC and SSC Cabinets |
117 | Modal Analysis of the Universal Testing Machine Assembly |
118 | Static Analysis of Furnace Chamber |
119 | Static Analysis of Cubical Oven |
120 | Dynamic Response Analysis of Linear Friction Welding Machine |
121 | Finite Element Analysis of ATR Fixture |
122 | Finite element analysis of Trailer Assembly |
123 | Rotor dynamic analysis of Shaft Assembly |
124 | Modeling Finite Element Analysis of Main Frame Structure with Boom Post Assembly |
125 | Structural Analysis of A0234 Unit |
126 | Structural Analysis of A0247 and A0223 Unit |
127 | Finite Element Analysis of Rack Assembly |
128 | Finite Element Analysis of Power Supply Unit |
129 | Structural analysis of the GCP Console |
130 | Finite Element Analysis of Chamber Assembly |
131 | Finite Element Analysis of Gear Box Housing |
132 | Structural Analysis of A0267 Transformer Unit |
133 | Structural Analysis of Auxiliary chamber, Main chamber and Hinge assembly |
134 | Finite Element Analysis of magnetron door chamber assly for valeo project |
135 | Finite element analysis of 105KW propulsion motor enclosure integrated with cooling channels |
136 | Structural Analysis of A0234 Unit |
137 | Finite Element Analysis of Solar panel assembly |
138 | Finite element analysis of Chassis with and without Mast |
139 | Finite Element Analysis of Connector Assembly |
140 | Finite Element Analysis of BG Loco Cast Steel Wheel using 3D model |
141 | Structural Analysis of A0204 Unit |
142 | Finite Element Analysis of Commercial Vehicle Pump Assembly |
143 | Finite Element Analysis of Megntron Door Chamber Assembly |
144 | Finite Element Analysis of LPSC Chamber Assembly |
145 | Finite Element Analysis of Electronic unit |
146 | Structural Analysis of A0234 Unit |
147 | Finite Element Analysis of Pressure Vessel |
148 | Finite element analysis of 105KW propulsion motor enclosure integrated with cooling channels |
149 | Finite Element Analysis of Knee Implants |
150 | Structural Analysis of Active, OAS, Processor and Processor-2 Cabinets |
151 | Finite Element Analysis of Console |
152 | Finite Element Analysis of Pressure Vessel |
153 | Rotor- Dynamics Analyses for Chanju Project |
154 | Finite Element Analysis of Mission Payload Computer |
155 | Structural Analysis of Sharang and Akshay PDP Cabinets |
156 | Finite Element Analysis of DMFC V4 Console |
157 | Finite Element Analysis of DMFC V4 Console |
158 | Structural Analysis of TMT |
159 | Finite Element Analysis of Glove Box |
160 | Finite Element Analysis Vacuum Drying Oven |
161 | Finite Element Analysis of Chamber Assembly with Door |
162 | Finite Element Analysis of ATR Chassis |
163 | Finite Element Analysis of Chamber Assembly |
164 | Finite Element Analysis of Pressure Intensifier and Piston |
165 | Finite Element Analysis of Cooling Unit |
166 | Finite Element Analysis of Chamber Door Assembly |
167 | Structural Analysis of DCP and Server Cabinets |
168 | Analysis of DG systems and Control Unit |
169 | Finite Element Analysis of Airworthy Computer (AWC)-TRICOR10NV-FCTA |
170 | Finite Element Analysis of Rescue Hoist Bracket |
171 | Finite Element Analysis of Chiller Plant |
172 | Finite Element Analysis of Quench Chamber |
173 | Finite Element Analysis of Chamber Door Assembly |
174 | Finite Element Analysis of High Vacuum Furnace - NFC |
175 | Finite Element Analysis of Acceleration Vaccum Box - IPR |
176 | Finite Element Analysis of TS Vessel Assembly - IPR |
177 | Seismic Analysis of Acceleration Vaccum Box and TS Vessel Assembly |
178 | Finite Element Analysis of DG System for INSB |
179 | Finite Element Analysis of Vacuum Furnace |
180 | Finite Element Analysis of NFC-2 |
181 | Finite Element Analysis of Fixture 1 |
182 | Finite Element Analysis of Fixture 2 |
183 | Finite Element Analysis of Quench Chamber |
184 | Finite Element Analysis of IDU |
185 | Finite Element Analysis of WLR Cooling Unit and control panel |
186 | Finite Element Analysis of WLR Cooling Unit and control panel |
187 | Finite Element Analysis of P15 A and P17 Unit |
188 | Finite Element Analysis of Connectors |
189 | Finite Element Analysis of DG System for INSB |
190 | Static Analysis and Optimization of Solar Frame Structure |
191 | Finite Element Analysis and Thermal Analysis Of KA Band Transmitter |
192 | Finite Element Analysis of TG system for PT15 Bravo |
193 | Finite Element Analysis and Thermal Analysis for C-Band QRSAM |
194 | Finite Element Analysis of Solar Frame Structure |
195 | Finite Element Analysis of AO294 -11 |
196 | Finite Element Analysis of BARO VACUUM CHAMBER |
197 | Finite Element Analysis of Solar Frame Structure |
198 | Roto-Dynamic Analysis of Compressor Assembly |
199 | Finite Element Analysis of BARO VACUUM CHAMBER (With Modified Dish) |
200 | Finite Element Analysis of Portal Frame |
201 | Finite Element Analysis of CAT90 |
202 | Finite Element Analysis of Chiller Plant (40 Kw) |
203 | Finite Element Analysis of Valve Disc |
204 | Finite Element Analysis of 20KW Liquid Cooling Unit |
205 | Finite Element Analysis of Chamber Assembly TF600 |
206 | Finite Element Analysis of AOA Light |
207 | Finite Element Analysis of POSITION LIGHT |
208 | Finite Element Analysis of Valve Disc |
209 | Finite Element Analysis of APDU ASSY |
210 | Finite Element Analysis of Knife Plate |
211 | Modeling and Simulation of Load Bearing CFRP Structure |
212 | Finite Element Analysis of 3 KW Chiller Unit |
213 | Finite Element Analysis of Servo Electronic Unit |
214 | Finite Element Analysis of P01 Unit |
215 | Finite Element Analysis of 17KVA Transformer PDU , 40KVA Transformer PDU & Control PDU |
216 | Finite Element Analysis of RM44637-Oil Reservoir Unit |
217 | Finite Element Analysis of Isolation Transformer Cabinet |
218 | Finite Element Analysis of P07 Unit |
219 | Finite Element Analysis of DG-P 15 BRAVO System |
220 | Finite Element Analysis of Cargo Hook |
221 | Finite Element Analysis of Gas Quench Assembly |
222 | Finite Element Analysis of Al. Coating Plant |
223 | Finite Element Analysis of Vertical Actuator |
224 | Finite Element Analysis of Durability UTM |
225 | Structural Analysis for Project HMS & LFVDS |
226 | Finite Element Analysis of Electronic Cabinet |
227 | Studies on Noise level (Pollution) in Power Loom Machines |
228 | Design and Finite Element Analysis of Under Slung System |
229 | Finite Element Analysis of DG System for B&D Class |
230 | Shock,Noice,Vibration analysis on LCP for SMMG |
231 | Finite Element Analysis Of ERP Electronic Unit |
232 | Finite Element Analysis of XBAND Electronic Unit |
233 | Finite Element Analysis and Thermal Analysis of Electronic Unit |
234 | Finite Element Analysis of K-Band-Transmitter- Project PHAROS |
235 | Finite Element Analysis of Work station |
236 | Finite Element Analysis of DG & Humsa NG Transducer Array System |
237 | Finite Element Analysis of Autoclave Chamber |
238 | Finite Element Analysis of SPL-267 |
239 | Finite Element Analysis of DG System for P15-B Class |
240 | Finite Element Analysis of Winch |
241 | Finite Element Analysis of Implant Body |
242 | Finite Element Analysis of Platform Assembly |
243 | Finite Element Analysis RFBF Chamber |
244 | Finite Element Analysis Process chamber assembly |
245 | Finite Element Analysis of DIY Chamber |
246 | Finite Element Analysis of 20 Bar and 100 Bar Pressure Vessel |
247 | Finite Element Analysis of 6KW Chiller |
Kinematic and Dynamic Analysis | |
248 | Kinematic Analysis of a Conveyer System |
249 | Kinematic and Dynamic Simulation of an Excavator |
250 | Kinematic Analysis of a Variable Mach Number Wind Tunnel |
251 | Kinematic Analysis of Pump Drive Line |
252 | Window Closer Analysis using ADAMS |
253 | Kinematic Analysis of Door Latch – Actuator Mechanism |
254 | Kinematic Analysis of Hydraulic Boom Assembly |
255 | Kinematic and Dynamic Analysis of Four bar Mechanism for Lid |
256 | Multi Body Dynamic Simulation of Tandem Bogie Suspension |
257 | Multi body dynamic simulation of D/O Cage Assembly |
258 | MBD Analysis of Chamber Door Hinge |
259 | Development of Forward and Inverse Kinematics Analysis for Motion Controller of End to End Mine Detection & NBC Reconnaissance Payload Systems |
260 | Kinematic Analysis of Single Cylinder Engine Piston |
261 | Kinematic and Dynamic Analysis of Variable Guide Vane Mechanism |
262 | Kinematic and Dynamic Analysis of Thrust Vectoring Nozzle |
Computational Fluid Dynamic (CFD) Analysis | |
263 | CFD Analysis for Prediction of Plume Trajectory |
264 | CFD Analysis for Ventilation and Defrost |
265 | CFD Analysis of a Duct System |
266 | CFD Analysis of the Gas Flow Distribution of a U-Tube Heat Exchanger |
267 | CFD Analysis of a Radiator Cap |
268 | 2D & 3D Simulation of Fluid Domain including Heat Transfer and Radiation – Airflow Analysis |
269 | CFD Analysis of Diesel Heating Plug |
270 | CFD analysis for LFB function in VE pump diesel engine component |
271 | CFD Analysis for cooling of Electronic Device |
272 | CFD and Structural analysis of Oil Filter |
273 | Study on flow of air and mist in the Shop Floor |
274 | CFD analysis of Telephone Instrument |
275 | CFD Analysis of Air Filter |
276 | CFD Analysis on a Diesel Engine Silencer |
277 | Nozzle Analysis using Fluent |
278 | CFD Analysis of Air Filters |
279 | CFD Analysis of Flow Meter |
280 | CFD analysis of nozzle |
281 | Design Optimization of Air Filter for Reduction in Pressure Drop |
282 | Computational Fluid Dynamic (CFD) Analysis of Reformer |
283 | CFD analysis to evaluate the thermal performance of ATR-2 |
284 | CFD analysis to evaluate the thermal performance of ATR-2( Iteration-II) |
285 | CFD -Thermal Analysis of CDU |
286 | CFD Analysis of the Exhaust Duct of a Dump Truck |
287 | CFD -Thermal Analysis of IU Box |
288 | Fluid structure interaction Analysis of u channel cooling device |
289 | CFD Analysis of ORC Turbine System |
290 | CFD Analysis of trailer unit |
291 | CFD Analysis of generic search light head |
292 | Performance Study and Improvement in the Design of Submersible Pump by CFD |
293 | CFD Analysis of the Deployment System & Shape/Length Optimization of the Drogue Unit |
294 | CFD Analysis of Al Mansoor Gate Mall |
295 | CFD Analysis of the Deployment System & Shape/Length Optimization of the Drogue Unit |
296 | Air flow Analysis of the Housing with Rotor |
297 | CFD Analysis of Hydraulic Actuator Seal Clearance Region |
Thermal Analysis | |
298 | Thermal Analysis of Electronic Equipment |
299 | Thermal Analysis of ATR |
300 | Analysis to evaluate the thermal performance of ATR |
311 | Thermal Analysis of 5 level Cabinet |
312 | Transient Thermal Analysis of ATM |
313 | Thermal Analysis of Plastic vessel |
314 | Thermal analysis of A0107 ATR |
315 | Thermal analysis of A0128 ATR |
316 | Thermal Analysis of Single display and Dual Display Units |
317 | Thermal Analysis of Tx Cabinet |
318 | Thermal Analysis of Hermetically Sealed Unit |
319 | Thermal Analysis of TBGA |
320 | Thermal Analysis of CC, CO EEP, LC and SSC Cabinets |
321 | Thermal Analysis of Platen |
322 | Thermal Analysis of A0247 and A0223 Unit |
323 | Thermal analysis of the GCP Console |
324 | Thermal Analysis of PDP Cabinet (2cases) |
325 | Thermal Analysis of Processing Cabinet |
326 | Thermal Stress Analysis of Retort Assly. |
327 | Thermal analysis of the PMS Console |
328 | Thermal Analysis of A0264 Unit |
329 | Thermal Analysis of Conduction Cooled ATR |
330 | Thermal Analysis of Processing Cabinet |
331 | Thermal Analysis of TMT |
332 | Thermal Analysis of DCP and Server Cabinets |
333 | Thermal Analysis of Active, OAS, Processor and Processor-2 Cabinets |
334 | Thermal Analysis of JMC Unit |
335 | Thermal Analysis of High Speed ADC-DAC system |
336 | Thermal Analysis of INT Unit |
337 | Thermal Analysis of CIT-DIO & INT-DIO Cards |
338 | Thermal Analysis of SSDVR Unit |
339 | THERMAL ANALYSIS of DLRL SBE_PPC_V7 Card |
340 | Thermal Analysis of Narrow Band Rack |
341 | Thermal Analysis of TRMM system |
342 | Thermal Analysis of PO3 Unit |
343 | Thermal Analysis of CAT90 |
344 | Thermal Analysis Analysis of AOA Light |
345 | Thermal Analysis of Servo Electronic Unit |
346 | Thermal Analysis of 17KVA Transformer PDU , 40KVA Transformer PDU & Control PDU |
347 | Thermal Analysis of P07 Unit |
348 | Thermal Analysis of VAM Controller Assembly |
349 | Thermal Analysis of Updated 17KVA Transformer PDU |
350 | Thermal Analysis of PCB-1 |
351 | Thermal & Finite Element Analysis of ESM Electronic Unit |
352 | Thermal Analysis of K-Band-Transmitter- Project PHAROS |
Manufacturing Simulation | |
353 | Casting Simulation of component |
354 | Resistance Butt Welding (RBW) Process Improvement |
355 | Casting Simulation of Steering Housing Complet(89482021) |
M. S. Ramaiah University of Applied Sciences
No-470-P, 4th Phase, Peenya Industrial Area, Bangalore - 560058
Phone: +91 77609 58997
Fax: +91 80 4211 1205
email:gm.tce@msruas.ac.in